Operating Instruction AG 500-12D (04)

12 English
4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum diameter of Ø 5" and a maximum disc
thickness of 1/4" (grinding discs) or 1/8" (cutting discs) which are approved for use at a rotational speed of
at least 11,500/min and a peripheral speed of 80 m/s may be used.
WARNING! When cutting or slitting with cutting discs, always use the standard guard with additional
cover plate.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slitting ACD Metal
Diamond cutting disc Cutting, slitting DC-TP, DC-D (SPX,
SP, P)
Mineral
Abrasive grinding disc Rough grinding AG-D, AF-D, AN-D,
AG-D type 27
Metal
Diamond grinding disc Rough grinding DG-CW (SPX, SP,
P)
Mineral
Wire brushes Wire brushes 3CS, 4CS, 3SS,
4SS
Metal
Abrasive resin-fiber disc Rough grinding AP-D Metal
Suitability of discs for the equipment used
Item Equipment ACD AGD,
AFD,
AND
DG-CW
(SPX,
SP, P)
DC-TP,
DC-D
(SPX,
SP, P)
AP-D 3CS,
4CS,
3SS,
4SS
AG-D
type 27
A Guard X X X X X X —
B Front cover (in
combination with
A)
X — — X — — —
C DG-EX 125/5" dust
hood for grinding
— — X — — — —
D DC-EX 125/5"C dust
hood for cutting (only
in conjunction with A)
— — — X — — —
E Side handle X X X X X X —
F DCBG 125 hoop
handle (optional for
E)
X X X X X X —
G Clamping nut (not for
use with accessories
with integrated
thread)
X X X X — — —
H Clamping flange
(not for use with
accessories with
integrated thread)
X X X X — — —
I
Kwik lock (optional
for G)
X X — X — — —
J Clamping nut for
abrasive resin-fiber
disc
— — — — X — —
K Support plate — — — — X — —
L Guard type 27 — — — — — — X
Printed: 20.04.2018 | Doc-Nr: PUB / 5300555 / 000 / 01