Operating Instruction TE 60 (04)

*2134961*
2134961 English 9
TE 60AVR TE 60-ATC/AVR
Ø Breach bits
1 9/16 in … 3 1/8 in
(39.7 mm …
79.4 mm)
1 9/16 in … 3 1/8 in
(39.7 mm …
79.4 mm)
Ø Percussion core bits
1 3/4 in … 4 in
(44.4 mm …
100 mm)
1 3/4 in … 4 in
(44.4 mm …
100 mm)
Ø PCM diamond core bits
•/• 1 1/2 in … 4 in
(38 mm … 100 mm)
Ø Drill bits for metal
0 in … 1/2 in
(0 mm … 13 mm)
0 in … 1/2 in
(0 mm … 13 mm)
Ø Drill bits for wood
13/32 in … 1 1/4 in
(10.3 mm …
31.8 mm)
13/32 in … 1 1/4 in
(10.3 mm …
31.8 mm)
Chuck
TEY TEY
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1.1 Fitting the side handle 3
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and
into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
5.1.2 Fitting the depth gauge (optional) 4
1. Release the side handle clamping band by turning the handle grip.
2. Slide the depth gauge from the front into the 2 guide holes provided.
3. Tighten the side handle clamping band by turning the handle grip.