Vacuum Portfolio Supporting Information

Vacuum Submittal

VACUUM CLEANER

VC 125 / 150 / 300 OSHA

Hilti developed a vacuum cleaner system with a filter cleaning mechanism and a >99% filter efficiency, compliant with many of the

OSHA 1926.1153, Table 1 specified controls.

Set-up

1. Put a filter into the filter compartment. Decide which filter depending on your applications. See filter section for further

information.

2. Put filter bag into the tank. Decide which filter bag depending on your applications. See filter bag section for further information.

3. Put hose into head and attach it to the adaptor of the tool. See tool manual for further information on correct adaptor.

4. Plug vacuum cleaner in socket.

5. Start vacuum cleaner by turning control switch on. Verify proper operation of vacuum cleaner.

• head on correct and sealed

• no kinks/breaks/plugs in hose

• check for normal suction at hose end

• nothing blocking exhaust port

• For VC 20/40/150/300, verify the automatic filter cleaning mechanism is turned on, and operating

(audible thumping every ~15 seconds).

6. Start running the tool only when vacuum cleaner is on.

7. Turn vacuum cleaner off after tool is turned off.

Cleaning and maintenance

1. For VC 125, push manual filter cleaning button every 3 to 5 minutes depending on application, and whenever there is a noticeable

change in suction or dust collection..

2. Filter and filter bag needs to be cleaned and exchanged regularly. See filter and filter bag section for further information.