VC 300-17 X Printed: 22.02.
Printed: 22.02.
1 Indicações sobre a documentação 1.1 Sobre esta documentação • • • Antes da colocação em funcionamento, leia esta documentação. Esta é a condição para um trabalho seguro e um manuseamento sem problemas. Tenha em atenção as instruções de segurança e as advertências nesta documentação e no produto. Guarde o manual de instruções sempre junto do produto e entregue-o a outras pessoas apenas juntamente com este manual. 1.2 Explicação dos símbolos 1.2.
Dados do produto Aspirador a húmido e a seco Geração N.° de série VC 300-17 X 01 1.5 Declaração de conformidade Declaramos sob nossa exclusiva responsabilidade que o produto aqui descrito está em conformidade com as directivas e normas em vigor. Na parte final desta documentação encontra uma reprodução do organismo de certificação. A documentação técnica está depositada junto da: Hilti Entwicklungsgesellschaft mbH | Zulassung Geräte | Hiltistraße 6 | 86916 Kaufering, DE 2 Segurança 2.
▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ Limpe o dispositivo de regulação do nível da água periodicamente com uma escova segundo as instruções e examine-o quanto a indícios de danos. Ao colocar a cabeça de aspiração, certifique-se de que não se magoa e não danifica o cabo de rede. Verifique a ferramenta e os acessórios quanto a eventuais danos. Todos os dispositivos de segurança ou quaisquer elementos ligeiramente danificados deverão ser verificados quanto ao seu correcto funcionamento antes da utilização.
2.7 Material aspirado ▶ ▶ ▶ ▶ ▶ ▶ ▶ 4 Pós perigosos para a saúde, inflamáveis e/ou explosivos não podem ser aspirados (pó de magnésio e alumínio, etc.). Materiais, com uma temperatura superior a 60°C (140°F), não podem ser aspirados (p. ex., cigarros ardentes, cinzas quentes). Não podem ser aspirados líquidos inflamáveis, explosivos ou cáusticos (líquidos de refrigeração e lubrificantes, gasolina, solventes, ácidos (pH < 5), lixívias (pH > 12,5), etc.).
3 Descrição 3.1 Vista geral do produto Português Printed: 22.02.
@ ; = % & ( Interruptor do aparelho Bocal da mangueira Contentor Linguetes de segurança Cabeça de aspiração Pega do contentor ) + § / : Gancho para cabo Linguete de segurança para tampa do filtro Mangueira de escoamento (opcional) Cavidades dos punhos Tampa do filtro 3.2 Utilização correcta O produto aqui descrito é um aspirador industrial universal para o uso industrial. Pode ser utilizado em aplicações a seco e a húmido.
4 Características técnicas Nota Consulte a tensão nominal, corrente nominal, frequência e/ou potência nominal na sua placa de características específica do país. Em caso de alimentação por um gerador ou transformador, a respectiva potência de saída deverá ter, no mínimo, o dobro da potência nominal indicada na placa de características da ferramenta. A tensão de serviço do transformador ou gerador deverá encontrar-se sempre entre +5% e -15% da tensão nominal da ferramenta.
5.2 Colocar/substituir o saco colector do pó de velcro PERIGO Risco de ferimentos. Objectos pontiagudos poderiam perfurar o saco colector. ▶ 1. 2. 3. 4. 5. 6. 7. Certifique-se de nenhum objecto perfurou o saco colector. Retire a ficha de rede da tomada. Abra os dois linguetes de segurança. Levante a cabeça de aspiração, separando-a do contentor. Feche a "gola" do saco colector do pó através da tampa. Limpe o contentor com um pano. Fixe um novo saco colector do pó (de velcro) no contentor.
6 Utilização PERIGO Perigo devido a corrente eléctrica. Se o aspirador não estiver devidamente ligado, a consequência podem ser a morte ou ferimentos graves. ▶ Ligue o aspirador apenas a uma fonte de energia com a devida ligação à terra. AVISO Risco de ferimentos. Danos no sistema de filtragem podem originar a saída de pó nocivo para a saúde. ▶ Em caso de emergência (p. ex.
6.4 Esvaziar o contentor em caso de pós secos 1. Retire a ficha de rede da tomada. 2. Retire a cabeça de aspiração do contentor e coloque-a sobre uma superfície plana. 3. Retire o saco colector do pó do contentor ou pegue pelas cavidades do punho e incline o contentor para o esvaziar. 4. Coloque a cabeça de aspiração no contentor e feche os dois linguetes de segurança. 6.5 Esvaziar o contentor sem saco colector do pó (no caso de líquidos) 1. 2. 3. 4. 5. Retire a ficha de rede da tomada.
Manutenção AVISO Perigo devido a choque eléctrico! Reparações incorrectas em peças eléctricas podem causar ferimentos e queimaduras graves. ▶ • • • As reparações na parte eléctrica apenas podem ser executadas por um electricista especializado. Verificar, regularmente, todos os componentes visíveis quanto a danos e os comandos operativos quanto a funcionamento perfeito. Em caso de danos e/ou perturbações de funcionamento, não operar a ferramenta eléctrica.
7.4 Verificar o controlo do nível de enchimento 1. 2. 3. 4. Accione os travões das rodas para um posicionamento seguro do aspirador. Retire a ficha de rede da tomada. Abra os dois linguetes de segurança. Retire a cabeça de aspiração do contentor e coloque-a sobre uma superfície plana. 5. Verifique se os contactos de desconexão não estão sujos e, se for necessário, limpe-os com uma escova. 6. Verifique se a junta na cabeça de aspiração não está suja e, se for necessário, limpe-a com um pano. 7.
Avaria A turbina de sucção não arranca após a limpeza do contentor. A potência de sucção diminui. Causa possível Função de desactivação automática activa. Solução ▶ ▶ ▶ Comute o interruptor do aparelho para esta posição . Aguarde 5 segundos. Comute o interruptor do aparelho para esta posição . Sonda muito suja ▶ O bocal de aspiração, o tubo de aspiração, a mangueira de aspiração ou o filtro estão obstruídos. ▶ Remova a obstrução.
14 Português Printed: 22.02.
Printed: 22.02.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 22.02.