Operating Instruction DX 9-HSN

*2194029*
2194029 English 7
4 Technical data
4.1 Technical data
DX 9–HSN
Weight
28.4 lb
(12.9 kg)
Dimensions (L × W × H)
39.3 in × 14.4 in × 6.9 in
(999 mm × 365 mm × 175 mm)
Magazine capacity
60 nails / 40 cartridges
Suitable cartridges
6.8/11 M40 red or other car-
tridges of a type approved for
use with the tool
Suitable fasteners
XHSN 24
Fastener driving rate
0.333 Hz
(1,200 rev/h)
Thickness of the supporting steel
1/8 … 3/8″
Compression stroke
3.20 in
(81.3 mm)
Contact pressure
≥ 56 lb
f
(≥ 250 N)
Application temperature (ambient temperature)
5 ℉ … 122 ℉
(−15 ℃ … 50 ℃)
4.2 Noise information
The noise values listed were determined under the following conditions:
General conditions for noise measurements
Direct fastening tool DX 9–HSN
Model Series
Caliber 6.8/11 red
Power setting 4
Application Fastening to steel plate (Brinell
hardness 358 N/mm
2
) using the
X–HSN 24
Noise information in accordance with EN 15895
Emission sound pressure level (L
pA
)
98 dB(A)
Uncertainty for the sound pressure level (K
pA
)
2 dB(A)
Sound (power) level (L
WA
)
106 dB(A)
Uncertainty for the sound power level (K
WA
)
2 dB(A)
Peak sound pressure emission level (L
pC, peak
)
131 dB(C)
Uncertainty for the peak sound pressure level (K
pCpeak
)
2 dB(C)
4.3 Vibration
The vibration value that must be specified in accordance with 2006/42/EC does not exceed 2,5 m/s².
5 Operation
5.1 Preparations at the workplace
5.1.1 Establishing the position of the fasteners
To avoid incorrectly driven fasteners, proceed as follows: