Operating Instruction SD 2500 (01), SD 4500 (01)

*2021357*
2021357 English 5
3 Description
3.1 Overview of the product 1
@
Bit holder
;
Chuck
=
Power tool / accessory interface (snap-on
connection)
%
Coupling system / gearing
&
Belt hook
(
Motor
)
Air intake
+
Forward/reverse switch
§
Lockbutton for continuous operation
/
On / off switch
:
Supply cord
∙
Type identification plate
$
Air exit
£
Depth gauge
3.2 Intended use
The product described is a hand-held mains-powered electric tool for use in drywall installation.
The power tool is designed for driving and removing screws in drywall installation work. Drywall screws with
a length of up to 55 mm and a diameter of up to 4.2 mm can be used.
Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.3 Items supplied
Drywall screwdriver, operating instructions
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.com.
4 Technical data
4.1 Technical data
SD 4500 SD 2500
Rated current input
6.5 A 3.3 A
Weight
1.4 kg
(3.1 lb)
1.5 kg
(3.3 lb)
Rated speed under no
load
0 /min … 4,500 /min 0 /min … 2,500 /min
Max. torque
9.5 Nm 19 Nm
Socket/bit drive
Hex socket
1
/
4
" Hex socket
1
/
4
"
Printed: 22.10.2018 | Doc-Nr: PUB / 5135889 / 000 / 03