DX 9 Quick Start Guide - Supplement

FASTENING METAL DECK TO THE STEEL STRUCTURE
12
INDEX
UNDERSTANDING THE SERVICE INDICATOR
The Hilti DX 9-HSN / DX 9-ENP tool has an integrated digital Service Indicator. The digital Service
Indicator on the DX 9 gives real-time feedback on when to clean and service the tool, maximizing
productivity on the job. The tools operating temperature range is also displayed, helping you to work
at the optimal pace.
The SI displays prompts and eld what it means and the action required is explained below.
The gauge shows the optimal operating temperature
(i.e. working at optimal installation pace). A warning sign
shows when the tool temperature is extremely high.
A tool wrench is displayed when the tool needs to be
sent to Hilti Tool Service Center for maintenance.
A large cleaning brush is displayed
when the tool requires cleaning.
A progression bar with 7 segments indicates
the number of settings since the last cleaning.
Bluetooth button
Counter reset button
Display What it means Action required
–
Normal operation, tool cold.
Fastening count progressing.
–
Cleaning brush appears
on the display.
Clean the tool and reset the
counter after cleaning.
Temperature warning
appears on the display.
WARNING: Tool is extremely hot –
cartridges can re prematurely and
plastic nail strips can melt if they
remain stagnant while inside the
tool. Cartridge and nail strips must
be removed from the tool, and
use of the tool must be ceased
immediately until tool temperature
returns to normal.
Wrench appears on the
display.
Tool needs maintenance. Send the
tool to Hilti Tool Service Center.
Wrench appears on the
display but the tempera-
ture bulb missing.
Temperature sensor dysfunctional
– send the tool to Hilti Tool Service
Center to get the temperature
sensor replaced.