Operating Instruction TE 500, TE 500-AVR (01)

6 English
@
Chuck
;
Function selector switch
=
Control switch
%
Control switch lock
&
Side handle
(
Rear grip surface
)
Service indicator
+
Theft protection indicator (optional)
§
Active Vibration Reduction AVR (only
TE 500-AVR)
3.2 Intended use
The product described is an electrically powered breaker. It is designed for medium-duty chiseling work on
masonry and concrete.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which greatly reduces vibration.
3.4 Service indicator
The breaker is equipped with a service indicator LED.
Status Meaning
The service indicator lights. • End of service interval – servicing is due.
The service indicator blinks. • The product is faulty. Have the product repaired
by a trained electrical specialist.
Bring the product to Hilti Service in good time. This will help to ensure that it’s always ready for use.
3.5 Items supplied
Breaker, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4 Technical data
4.1 Breaker
For details of the rated voltage, frequency, current and input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
TE 500 TE 500-AVR
Weight
5.6 kg
(12.3 lb)
5.7 kg
(12.6 lb)
Protection class
II II
4.2 Using extension cords
WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance’s supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
Printed: 18.04.2018 | Doc-Nr: PUB / 5130650 / 000 / 03