ICC ESR-3027 for Kwik HUS-EZ Screw Anchors in Concrete

ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed
as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as
to any finding or other matter in this report, or as to any product covered by the report.
Copyright © 2021 ICC Evaluation Service, LLC. All rights reserved. Page 19 of 20
ICC-ES Evaluation Report
ESR-3027 LABC and LARC Supplement
Reissued December 2019
Revised April 2021
This report is subject to renewal December 2021.
www.icc-es.org | [phone] | [phone] A Subsidiary of the International Code Council
®
DIVISION: 03 00 00—CONCRETE
Section: 03 16 00—Concrete Anchors
DIVISION: 05 00 00—METALS
Section: 05 05 19—Post-Installed Concrete Anchors
REPORT HOLDER:
HILTI, INC.
EVALUATION SUBJECT:
HILTI KH-EZ, KH-EZ P, KH-EZ PM, KH-EZ PL, KH-EZ C, KH-EZ E, KH-EZ I, AND KH-EZ CRC CARBON STEEL SCREW
ANCHORS AND KH-EZ SS316 AND KH-EZ C SS316 STAINLESS STEEL SCREW ANCHORS FOR USE IN CRACKED
AND UNCRACKED CONCRETE
1.0 REPORT PURPOSE AND SCOPE
Purpose:
The purpose of this evaluation report supplement is to indicate that the Hilti KH-EZ, KH-EZ P, KH-EZ PM, KH-EZ PL, KH-EZ
C, KH-EZ E, KH-EZ I, and KH-EZ CRC carbon steel screw anchors and KH-EZ SS316 and KH-EZ C SS316 stainless steel
screw anchors in cracked and uncracked concrete, described in ICC-ES evaluation report ESR-3027, have also been
evaluated for compliance with the codes noted below as adopted by Los Angeles Department of Building and Safety (LADBS).
Applicable code editions:
 2020 City of Los Angeles Building Code (LABC)
 2020 City of Los Angeles Residential Code (LARC)
2.0 CONCLUSIONS
The Hilti KH-EZ, KH-EZ P, KH-EZ PM, KH-EZ PL, KH-EZ C, KH-EZ E, KH-EZ I, and KH-EZ CRC carbon steel screw anchors
and KH-EZ SS316 and KH-EZ C SS316 stainless steel screw anchors in cracked and uncracked concrete, described in
Sections 2.0 through 7.0 of the evaluation report ESR-3027, comply with LABC Chapter 19, and LARC, and are subject to the
conditions of use described in this report.
3.0 CONDITIONS OF USE
The Hilti KH-EZ, KH-EZ P, KH-EZ PM, KH-EZ PL, KH-EZ C, KH-EZ E, KH-EZ I, and KH-EZ CRC carbon steel screw anchors
and KH-EZ SS316 and KH-EZ C SS316 stainless steel screw anchors described in this evaluation report supplement must
comply with all of the following conditions:
 All applicable sections in the evaluation report ESR-3027.
 The design, installation, conditions of use and labeling of the anchors are in accordance with the 2018 International Building
Code
®
(IBC) provisions noted in the evaluation report ESR-3027.
 The design, installation and inspection are in accordance with additional requirements of LABC Chapters 16 and 17, as
applicable.
 Under the LARC, an engineered design in accordance with LARC Section R301.1.3 must be submitted.
 The allowable and strength design values listed in the evaluation report and tables are for the connection of the anchors to
the concrete. The connection between the anchors and the connected members shall be checked for capacity (which may
govern).
 For use in wall anchorage assemblies to flexible diaphragm applications, anchors shall be designed per the requirements
of City of Los Angeles Information Bulletin P/BC 2020-071.
This supplement expires concurrently with the evaluation report, reissued December 2019 and revised April, 2021.