ICC ESR-3027 for Kwik HUS-EZ Screw Anchors in Concrete

ESR-3027
|
Most Widely Accepted and Trusted Page 6 of 20
5.18 Special inspection must be provided in accordance with
Sections 4.4.
5.19 KH-EZ, KH-EZ SS316, KH-EZ P, KH-EZ PM, KH-EZ PL,
KH-EZ C, KH-EZ C SS316, KH-EZ E, KH-EZ I and KH-
EZ CRC anchors are manufactured, under a quality
control program with inspections by ICC-ES.
6.0 EVIDENCE SUBMITTED
Data in accordance with the ICC-ES Acceptance Criteria for
Mechanical Anchors in Concrete Elements (AC193),
dated October 2017 (editorially revised December 2020),
which incorporates requirements in ACI 355.2-19 /
ACI 355.2-07, for use in cracked and uncracked concrete;
and quality control documentation.
7.0 IDENTIFICATION
7.1 HILTI KH-EZ, KH-EZ SS316, KH-EZ P, KH-EZ PL, KH-
EZ C, KH-EZ C SS316, KH-EZ E, KH-EZ I and KH-EZ
CRC anchors are identified by packaging with the
company name (Hilti, Inc.), anchor name, anchor size,
and evaluation report number (ESR-3027). The anchors
with hex washer head, pan head and countersunk head,
have KH-EZ, HILTI, and anchor size and anchor length
embossed on the anchor head. Identifications are
visible after installation, for verification.
7.2 The report holder’s contact information is the following :
HILTI INC.
7250 DALLAS PARKWAY, SUITE 1000
PLANO, TEXAS 75024
[phone]
www.us.hilti.com
[e-mail]
FIGURE 1—KWIK HUS EZ ANCHOR
FIGURE 3
—
HILTI KH-EZ I SCREW
A
NCHOR
FIGURE 2—HILTI KH-EZ CONCRETE SCREW ANCHOR
FIGURE 4—HILTI KH-EZ P, PM, PL SCREW ANCHORS
FIGURE 5
—
HILTI KH-EZ E SCREW ANCHOR
FIGURE 6—HILTI KH-EZ CRC SCREW ANCHOR
FIGURE 7
—
HILTI KH-EZ C SCREW ANCHOR
FIGURE 9
—
HILTI KH-EZ C SS316 SCREW ANCHOR
FIGURE 8—HILTI KH-EZ SS316 SCREW ANCHOR