PIPE SADDLE WITH U-BOLT 2199861 / 2199851 2199862 / 2199852 2199863 / 2199853 2199864 / 2199854 2199865 / 2199855 2199866 / 2199856 2199867 / 2199857 2199868 / 2199858 2199869 / 2199859 2199870 / 2199860 Hilti North America Installation Technical Manual Technical Data Hangers & Clamps Version 1.0 18.09.
Terms of common cooperation / Legal disclaimer The product technical data published in these Technical Data Sheets are only valid for the mentioned codes or technical data generation methods and the defined application conditions (e.g. ambient temperature load capacity not valid in case of fire, data not valid in support structures when mixed with third party products, values only apply to static loading conditions).
Data version 1.0 I Date 18.09.
Data version 1.0 I Date 18.09.2018 Page 2/7 Pipe Saddle with U bolt Instruction For Use: Installation Technical Manual - Technical Data Hangers & Clamps Boundary conditions - Terms of common cooperation / Legal disclaimer and guidelines as defined at the beginning of this book need to be mandatorily respected.
Data version 1.0 I Date 18.09.2018 Page 3/7 Pipe Saddle with U bolt Possible loading cases Pipe Saddle with Uncoated U-Bolt Pipe Saddle with Coated U-Bolt Design Criteria used for loading capacity Methodology: • Connection strength values are based on empirical calculations.
Data version 1.0 I Date 18.09.2018 Page 4/7 Pipe Saddle with U bolt Pipe Saddle with Uncoated U-Bolt Pipe Saddle with Coated U-Bolt Loading case: In Uncoated Pipe Saddle Combinations covered by loading case BOM: Pipe Saddle Connector (item number varies) Pipe Saddle with Uncoated U-Bolt (item number varies) This particular loading case is limited by the threaded Rod.
Data version 1.0 I Date 18.09.2018 Page 5/7 Pipe Saddle with U bolt Conditions for the loading capacity tables: • Just for Static Loads • No fatigue loads • No low (< -10oC), no high (> +100oC) temperatures Pipe Saddle with Uncoated U-Bolt Pipe Saddle with Coated U-Bolt Design loading capacity - 3D 2/2 NOTE: The provided values are based on empirical calculations capacity of the assembly. A safety factor of 3 as stated in the notes has been applied.
Data version 1.0 I Date 18.09.2018 Page 6/7 Pipe Saddle with U bolt Pipe Saddle with Uncoated U-Bolt Pipe Saddle with Coated U-Bolt Loading case: In Coated Pipe Saddle Combinations covered by loading case BOM: Pipe Saddle Connector (item number varies) Pipe Saddle with Coated U-Bolt (item number varies) This particular loading case is limited by the threaded Rod.
Data version 1.0 I Date 18.09.2018 Page 7/7 Pipe Saddle with U bolt Conditions for the loading capacity tables: • Just for Static Loads • No fatigue loads • No low (< -10oC), no high (> +100oC) temperatures Pipe Saddle with Uncoated U-Bolt Pipe Saddle with Coated U-Bolt Design loading capacity - 3D 2/2 NOTE: The provided values are based on empirical calculations capacity of the assembly. A safety factor of 3 as stated in the notes has been applied.
Data version 1.2 I Date 08.2017 In the US: Hilti, Inc. (U.S.) P.O. Box 21148 Tulsa, OK 74121 Customer Service: 1-800-879-8000 en español: 1-800-879-5000 Fax: 1-800-879-7000 In Canada: Hilti (Canada) Corporation 2360 Meadowpine Blvd. Mississauga, Ontario, L5N 6S2 Customer Service: 1-800-363-4458 Fax: 1-800-363-4459 www.us.hilti.com www.hilti.ca Hilti is an equal opportunity employer Hilti is a registered trademark of Hilti, Corp. ©Copyright 2017 by Hilti, Inc. (U.S.
