Operating Instruction SR 30 (01)

*2243130*
2243130 English 9
Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries including
burns.
▶ Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Store or online at: www.hilti.group.
7 Transport and storage
• Do not transport electric tools with accessory tools fitted.
• Always unplug the supply cord before storing an electric tool or appliance.
• Store tools and appliances in a dry place where they cannot be accessed by children or unauthorized
persons.
• Check electric tools or appliances for damage after long periods of transport or storage.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
8.1 The reciprocating saw is not in working order
Trouble or fault Possible cause Action to be taken
Power tool does not start. The transport lock is engaged. ▶ Disengage the transport lock.
The saw blade cannot be
removed from the chuck.
The locking lever was not pushed
as far as it will go.
▶ Push the locking lever as far as
it will go and remove the saw
blade.
Chuck clogged by residues from
sawing operations.
▶ Remove the residues from
sawing operations and regularly
clean the chuck from the
outside. Care of the power tool.
→ page 8
8.2 The reciprocating saw is in working order
Trouble or fault Possible cause Action to be taken
The power tool does not de-
velop full power.
The control switch is not fully
pressed
▶ Press the control switch fully.
The saw blade cannot be
removed from the chuck.
The locking lever was not pushed
as far as it will go.
▶ Push the locking lever as far as
it will go and remove the saw
blade.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.