ABS Type Approval 21-2140400-PDA for S-BT fastening system in off-shore and shipbuilding application

CERTIFICATE NUMBER 21-2140400-PDA

EFFECTIVE DATE 01-Aug-2021

EXPIRY DATE 31-Jul-2026

ABS TECHNICAL OFFICE Houston SED Structures -

Commercial

This is to certify that a representative of this Bureau did, at the request of

HILTI AKTIENGESELLSCHAFT

located at

FELDKIRCHERSTR. 100, 9494 SCHAAN, Liechtenstein

assess design plans and data for the below listed product. This assessment is a representation by the Bureau as to the degree

of compliance the design exhibits with applicable sections of the Rules. This assessment does not waive unit certification or

classification procedures required by ABS Rules for products to be installed in ABS classed vessels or facilities. This

certificate, by itself, does not reflect that the product is Type Approved. The scope and limitations of this assessment are

detailed on the pages attached to this certificate.

Product: Fastening System

Model: S-BT screw-in stainless steel multi-purpose threaded fasteners: S-BT-MR M10, S-BT-MR MT M10,

S-BT-MR W10, S-BT-MR M8, S-BT-MR MT M8

S-BT screw-in carbon steel multi-purpose threade...

Endorsements:

Tier: 3 - Type Approved, unit certification not required

This Product Design Assessment (PDA) Certificate remains valid until 31/Jul/2026 or until the Rules and/or Standards used

in the assessment are revised or until there is a design modification warranting design reassessment (whichever occurs first).

Acceptance of product is limited to the "Intended Service" details prescribed in the certificate and as per applicable Rules and

Standards.

This Certificate is valid for installation of the listed product on ABS units which exist or are under contract for construction

on or previous to the effective date of the ABS Rules and standards applied at the time of PDA issuance. Use of the Product

for non-ABS units is subject to agreement between the manufacturer and intended client.



American Bureau Of Shipping

Suresh Kumar Pisini,Engineer/Consultant

PAGE 1
CERTIFICATE NUMBER EFFECTIVE DATE EXPIRY DATE ABS TECHNICAL OFFICE 21-2140400-PDA 01-Aug-2021 31-Jul-2026 Houston SED Structures Commercial This is to certify that a representative of this Bureau did, at the request of HILTI AKTIENGESELLSCHAFT located at FELDKIRCHERSTR. 100, 9494 SCHAAN, Liechtenstein assess design plans and data for the below listed product. This assessment is a representation by the Bureau as to the degree of compliance the design exhibits with applicable sections of the Rules.
PAGE 2
HILTI AKTIENGESELLSCHAFT FELDKIRCHERSTR. 100 9494 SCHAAN Liechtenstein Telephone: +4232343825 Fax: Email: lorfeco@hilti.com Web: www.hilti.
PAGE 3
HILTI AKTIENGESELLSCHAFT FELDKIRCHERSTR. 100 9494 SCHAAN Liechtenstein Telephone: +4232343825 Fax: Email: lorfeco@hilti.com Web: www.hilti.
PAGE 4
HILTI AKTIENGESELLSCHAFT FELDKIRCHERSTR. 100 9494 SCHAAN Liechtenstein Telephone: +4232343825 Fax: Email: lorfeco@hilti.com Web: www.hilti.com Tier: 3 - Type Approved, unit certification not required approval process or specific guidelines are to be followed, the approved technical data or design guidelines take precedence over technical data presented herein. The arrangement and details of each vessel-specific installation are to be reviewed to ABS Rules as applicable.