HAC_Technical-Guide

322 323
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material 6. Loading
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
HAC Installation Product Delivery Special IInspectionsAnchor Channel Layout Design Substrate Type
10.1 PROFIS Anchor Channel at a Glance 10.2 Download and Installation 10.3 Tutorial
10.3.2.2 BASE MATERIAL TAB
Concrete
Uncracked concrete
If analysis indicates no cracking at service load levels, the use
of uncracked concrete can be justified.
Cracked concrete
If analysis indicates cracking at service load levels.
All-lightweight concrete (ALWAC) λ = 0.75
San lightweight concrete (SLWC) λ = 0.85
See section 5.1.2 for additional information.
Base material
Select the concrete cylinder compressive strength of the
substrate. Drop menu provides incremental of 1000 psi. For a
specific cylinder compressive strength, click on “Customize”
option and input the specific value.
Corner of Slab
• Activates pair of channels in a corner.
• Only symmetric corners are allows. For unsymmetrical
corners, use the highest loads.
• Analysis assumes both corner channels are loaded
simultaneously.
Top of slab corner Face of slab corner
Supplementary reinforcement