HAC_Technical-Guide

324 325
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material 6. Loading
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
HAC Installation Product Delivery Special IInspectionsAnchor Channel Layout Design Substrate Type
10.1 PROFIS Anchor Channel at a Glance 10.2 Download and Installation 10.3 Tutorial
Supplementary reinforcement
Anchor reinforcement
Anchor reinforcement precluded concrete breakout. See sections 7.3 and 7.4 for
additional information
Fastening group
This feature adds another bracket to the anchor channel. Although the analysis
assumes the brackets are loaded simultaneously, the configuration and loads can
be different.
Inspection Type
This tab only impacts the Ф factor for the shear steel strength of
connection between channel lips and channel bolts V
sl,x
Periodic inspection
HBC-C-N → Ф = 0.55
HBC-T → Ф = 0.65
Continuous inspection
HBC-C-N → Ф = 0.65
HBC-T → Ф = 0.75
In case of continuous inspection the value for V
sl,x
for the size
M12 can be taken for all channel sizes HAC-40F through
HAC-70 F as V
sl,x
= 2,021 lb (9.0 kN).
10.3.2.3 ANCHOR PLATE