HAC_Technical-Guide

334 335
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material 6. Loading
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
HAC Installation Product Delivery Special IInspectionsAnchor Channel Layout Design Substrate Type
10.1 PROFIS Anchor Channel at a Glance 10.2 Download and Installation 10.3 Tutorial
10.3.4 ANCHOR CHANNEL AND BOLT SELECTOR WINDOW
Step 1: Anchor channel type
Select the desired anchor channel type
Top of slab applications
Anchor channel type
Anchor channel size and profile type
Anchor channel length
Anchor channel effective embedment depth
Number of anchors
Distance from end of channel to first anchor
Usable anchor channel length
T-bolt type, steel grade, and steel grade
T-bolt diameter
Face of slab applications
Step 2: Anchor channel size and profile type
Select the desired anchor size and profile type; smooth lips (HAC) or serrated lips (HAC-T)
Step 3: Anchor channel length
Select the desired anchor channel length. Standard anchor channel configurations (standard lengths with fixed number of
anchors) are given in PROFIS Anchor Channel.
“User defined” allows users to input a custom channel length using the least possible number of anchors without exceeding the
maximum allowable anchor spacing. Contact Hilti for custom configurations.
*Anchor channels for top of slab applications
*Anchor channels for face of slab applications
HAC-70 CRFoS U is the only anchor channel configuration
that allows different number of anchors for the same anchor
channel length.
The term after the length (i.e. + 3 indicates the number of
rebars)
*Anchor channels for top of slab applications can be used in
face of slab applications and vice-versa.