ETA 11/0006 for HAC cast-in anchor (ETAG -, Option -)

European Technical Assessment
ETA-11/0006
English translation prepared by DIBt
Page 3 of 29 | 27 September 2019
Z52428.19 8.06.01-34/19
Specific Part
1 Technical description of the product
The Hilti anchor channel (HAC) with channel bolts (HBC) is a system consisting of V-shaped
channel profile of carbon steel and at least two metal anchors non-detachably fixed to the
channel back and channel bolts.
The anchor channel is embedded surface-flush in the concrete. Hilti channel bolts with
appropriate hexagon nuts and washers are fixed to the channel.
The product description is given in Annex A.
2 Specification of the intended use in accordance with the applicable European
Assessment Document
The performances given in Section 3 are only valid if the anchor channel is used in compliance
with the specifications and conditions given in Annex B.
The verifications and assessment methods on which this European Technical Assessment is
based lead to the assumption of a working life of the anchor channel of at least 50 years. The
indications given on the working life cannot be interpreted as a guarantee given by the
producer, but are to be regarded only as a means for choosing the right products in relation to
the expected economically reasonable working life of the works.
3 Performance of the product and references to the methods used for its assessment
3.1 Mechanical resistance and stability (BWR 1)
Essential characteristic Performance
Characteristic resistance under tension load
(static and quasi-static load)
See Annex C1 to C2 and
C6
Characteristic resistance under shear load
(static and quasi-static load)
See Annex C3 to C4 and
C6 to C7
Characteristic resistance under combined tension and shear
load
(static and quasi-static load)
See Annex C5
Characteristic resistances under cyclic fatigue tension load See Annex C10 to C11
Displacements (static and quasi-static load) See Annex C3 and C5
Durability See Annex B1
3.2 Safety in case of fire (BWR 2)
Essential characteristic Performance
Reaction to fire Class A1
Characteristic resistance to fire See Annex C8 to C9