User's Manual

E-bot manual
make sure the Wi-Fi switch is set to off. And run the E-bot
Viewer on your PC. Select USB as the connection method.
※ If you connect E-bot to a PC which does not support USB 3.0, the
enlarged image resolution is automatically adjusted to
accommodate the difference in connection speed. Please note: E-
bot cannot be supported on Mac computers which do not have
USB 3.0 capability.
 Wi-Fi
E-bot can output magnified images via Wi-Fi connection to Windows
PC’s, Android tablets and Apple iPads. Note: Wi-fi output is not
supported on Mac computers.
① To output to your PC via Wi-fi, install the E-bot Viewer
program on your PC using the installation CD in your packing
box.
② Set the E-bot Wi-Fi switch to ON. The Wi-Fi LED is changed
to blue to indicate Wi-fi is on.
The Wi-Fi LED is located on the top right of the control panel on the
main body. Wi-Fi LED status is shown as follows: