User's Manual

22
 Connecting to a PC (USB)
① Connect the E-bot’s USB 3.0 port to the USB port of your PC
using the included USB 3.0 cable.
② Turn on the E-bot. At this point, make sure the Wi-Fi switch is
set to off.
③ And run the E-bot Viewer on your PC. Select USB as the
connection method.
If you connect E-bot to a PC which does not support USB 3.0,
the enlarged image resolution is automatically adjusted to
accommodate the difference in connection speed.
E-bot cannot be supported on Mac computers which do not
have USB 3.0 capability.
For instructions on controlling E-bot using a keyboard and
mouse, please refer to the last section of this manual.
 Connecting to a PC (Wi-Fi)
E-bot can output magnified images via Wi-Fi connection to Windows