User's Manual

40
If the magnification level is changed during viewing of
recognized text, the magnification level is changed. However, if
the OCR view is set to image, the magnification level cannot be
adjusted below the magnification level that was set when OCR
was first played.
You may change the Color mode when viewing an OCR scan.
The available color modes are the same as those available in
near view mode.
 Reading/navigating recognized text
Move the Joystick to the Right to move to the next sentence.
Move the Joystick to the Left to move to the previous sentence.
Move the Joystick Down to move to the next paragraph.
Move the Joystick Up to move to the previous paragraph.
Navigate to the place where you want to begin reading text aloud
and press the Play/Stop button to begin reading at that point.
 OCR views
You may display OCR results as either an image, or as recognized
text.
① Bring up the Menu then move the Joystick to the Right to move
to the OCR tab and select “OCR View”.
② There are 4 options for displaying OCR results. , The current
setting is indicated with a check mark. Select your desired view
for OCR results.
 Image : Displays scanned image, highlights word being read
aloud.
 Whole text : Extracts recognized text and shows it on the