User's Manual

Table Of Contents

3) Camera position preference

 Position setting

You can set your favorite positions for the camera in the

near/distance view mode, and automatically move the camera to the

saved point.

① In the near/distance view mode, bring up the Menu and

select “Camera position preference” from the ‘Options’ tab.

② Place the camera in the location you want to save, and then

press the enter button.

③ After the setting is completed, if you press the near or

distance view button, the camera goes to the set position.

 Set the camera direction

① Press the menu button.

② Select “camera direction” from the ‘Options’ tab.

③ Choose from a Vertical or Horizontal.

 Joystick sensitivity

① Bring up the Menu and select “Joystick sensitivity” from the

‘Options’ tab.

② If you select the auto scroll, Speed will vary depending on

the slope of a joystick. When set to a specific speed,

regardless of the tilt of the joystick scrolling occurs at the set

speed.

4) Initialization

① Set the settings back to the factory defaults.

② Bring up the Menu and Select “Initialization” from the “Options”

tab.

③ You can initialize settings in the “Options” tab, in the “OCR” tab,