User's Manual

79
is displayed. You can move from one tab to the other tab by pressing
“tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)”.
If you execute “Save As” when you are editing a document that you
opened, the displayed file name, file format, and the folder are the same
as those of the file that you opened.
However, if you created a new document by executing the word
processor or by executing “New”, and you execute “Save” or “Save As”,
the displayed default file name is “noname.brl” and the file path is
“flashdisk/My Documents/”.
If you want to edit the file name that is displayed on the Braille display,
press the cursor routing key where you want to edit the file name, and
then modify it. Or, if you want to make a new file name, type in the new
file name without pressing any of the cursor routing keys. You cannot
use the following characters in a file or folder name. “|, \, <, >, ?, :, *”
If you want to change the file format, move to “Type”. In “Type”, move
to the file format that you want by pressing “Space-1” or “Space-4”.
If you want to save a file with a file name that is in the file list, move to
the “file list” by pressing “shift-tab”. When “file name” is displayed,
select your desired file by navigating the file list with the same method
that you used to navigate the “File manager” that was explained in
chapter 4.
5.1.5 Close Current Document
The “Close Current Document” command allows you to close the current
document that you are working on without closing the word processor.
You can access the “Close Current Document” command by pressing
“Space-m (dots 1-3-4)” or “F2”. Then, press “Enter” on the “File” menu.
Use the up and down arrows (“Space-1” and “Space-4”) until you find
“Close Current Document”, and then press “Enter”. Or, you can press
“q (dots 1-2-3-4-5)” in the “File” menu. You can also access this