User's Manual

118
6.2 Starting the Address Manager
When you press “Enter” on “Address manager” in the “program” menu,
the Braille Sense OnHand will say “Search Address”, and display the
prompt, “Last name:”. In other words, when you start the “Address
manager”, the “Search Address” dialog box will be opened.
In “Address manager”, you can use the menus to conveniently browse
and execute all of the available commands. When you cannot
remember the exact hot key for the command that you want to execute,
you can press “Space-m (dots 1-3-4)” or “F2” to open the menu.
6.3 Using “Add Address”
This dialog box allows you to enter new addresses in the Address
manager. In order to use the “Add Address” function, press “Space-m
(dots 1-3-4)” or “F2” to bring up the “Address manager” menu, and then
press the “Space-1”, “Space-4” or the up and down scroll button to move
to “Add Address”. Then, press “Enter”. Or, press “Enter-i (dots 2-4)”
(which is the hot key) in “Address manager”. While you are entering an
address, you can use the “Search Address” function (refer to section
6.4), “Set Address Fields” (refer to section 6.3.2), “Set Backup Option
(refer to section 6.5.3)”, “Backup Address List (refer to section 6.5.1)”
“Restore Address List (refer to section 6.5.2)” and “exit” commands,
using the menu or with other shortcut keys.
6.3.1 Adding an Address
“Add address” is a dialog box that contains a list of 22 input fields, the
“Memo” field, a “Confirm” button, and a “Cancel” button. In the input
fields, you can enter the information corresponding to the 22 fields of a
record. “Confirm” is used to save the information entered, and “Cancel”
is used to discard the entry. You can move among the input fields,
“Memo”, “Confirm”, and “Cancel” by pressing “tab (“Space-4-5”)” or
“shift-tab (“Space-1-2”)”. Among the 22 input fields, you can move from