User's Manual

142
blank if you want to. After you finish writing the information, you can
press “tab (“Space-4-5”)” to move to the next field.
7.4.8 Alarm Time
The “Alarm time” function allows you to set the time when you will be
notified about an appointment. The alarm is set relative to the
appointment time. For example, you may want the alarm to sound 30
minutes before your appointment, so that you are not late. The default
value for this field is set to “Time of appointment”. This means that the
alarm will sound at the same time as you have set for your appointment.
You can set the time in the same way as when you set the appointment
time. The time can be set anywhere from one minute to forty-seven
hours.
To set the time with shortcut keys, you can use the following commands.
1. Time setting keys
Move to 1 hour after: Space-4
Move to 1 hour before: Space-1
Move to 10 minutes after: Space-5
Move to 10 minutes before: Space-2
Move to 1 minute after: Space-6
Move to 1 minute before: Space-3
If you attempt to set the time to 0, the Braille Sense OnHand will display
the message, “Time of appointment”. If you do not want to set an alarm,
press “Space-1” when “Alarm time” is set to “Time of appointment”. Then,
“Alarm off” will be displayed, and the alarm for this appointment will be
turned off. After setting the “Alarm time”, save this appointment by
pressing “Enter”, or by pressing “tab (“Space-4-5”)” to move to the
“Confirm” button, and press “Enter”. If you have set the “Alarm time”, it
will go off at the specified time even if the Braille Sense OnHand is
turned off. If you want to stop the alarm, press “Backspace-Enter”.
7.4.9 Set a recurring Schedule