User's Manual

207
If you set it once, the e-mails from the e-mail addresses will be
downloaded from the e-mail server, but the Braille Sense OnHand will
delete those e-mails automatically. So those e-mails will not be found in
the inbox.
You can add an additional e-mail address by modifying the e-mail
address that you have typed in. If you type in a new e-mail address at
“E-mail address string: (e-mail address)”,, the displayed e-mail address
will be erased, and the new e-mail address will be displayed. But, if you
press the “cursor routing key” at the position where you want to modify
the displayed address, that address will be modified as you type in the
modifications.
When “E-mail address string: (registered e-mail address) 1/1” is
displayed, you can add it by pressing “a (dot 1)” or pressing “Tab
(Space-4-5)” to move to the “Add, and press “Enter”. You can check the
registered e-mail addresses by pressing “Space-1” or “Space-4”.
If you want to register a specific host as a spam sender, do the following:
1) Press “Space-m (dots 1-3-4)” or “F2” to call up the menu while
you are in the “inbox”..
2) Press “Space-4”, move to the “Tools”.
3) Press “Enter”..
4) It shows “Accounts manager”.
5) Press “Space-4”, move to “Spam Settings”.
6) Press “Enter”..
7) It shows “Type: Subject 1/3”. Without calling the menu, you can
also execute to this stage directly by pressing “Enter-e (dots 1-5)”.
8) Press “Space-4” when “Type: Subject 1/3” is displayed in order
to move to “Type: Host 3/3”..
9) Press “a (dot 1)” on “Type: Host 3/3”,, or press “Tab (Space-4-
5)” to move to the “Add” button, and then press “Enter”..
10) Then, the “Add dialog box” will be opened, and “Host add: (host
address)” will be displayed. Here, “host address” is the host
address that was focused on when you executed this command.