User's Manual

240
The “Recoding type” allows you to set the default file type of recording
file. Its default value is set to “mp3”. You can select between “wav” and
“mp3” the value by pressing “Space”.
The “Sample rate” option is used to control the quality of recorded sound.
Higher value in “Sample rate” means a better quality of recorded sound,
as well as a larger file size of recorded files. In other words, if you want
to record high quality sound, the total time the Braille Sense OnHand
can record will be shortened. On the other hand, if you set the lower
values of these option, the Braille Sense OnHand can record sound
longer, although the sound quality may not be as good as when these
options are set to higher values. You can change this value by pressing
“Space”.
The “Line in mode” option allows you to record by using line-in cable.
The default value is “Off”. If you want to record with line-in cable, change
to “On” by pressing “Space”. When you record the file using the Line-in
cable, you must set to “On” the “Line in mode”.
The “Set folder” allows you to set the default folder where the recorded
files will be saved. Its default value is set to “/flashdisk/media/record”.
To specify a different folder, press “Enter” on “Set folder”, and the same
dialog box as the “Open Folder” dialog box will be displayed. Select a
folder in the same way as in the “Open Folder” dialog box. (Refer to
section 9.3.1.2 for more information about how to select a folder.)
If you save the changed settings, and exit from this dialog box, press
“Enter” after changing all of the options you want to change, or move to
the “Confirm” button, and press “Enter”. If you want to cancel the
changes you made, press “Enter” on the “Cancel” button, or press
“Space-e (dots 1-5)”.
9.4.6.4 Effect Settings Dialog Box
Press “Space-m (dots 1-3-4)”or “F2” in media player program, move to
“Settings” menu and press “Enter”. By pressing “Space-4”, move to