User's Manual

248
Pressing “stop” button for more than 2 seconds will delete the selected
channel.
10.4 Recording FM radio sound
If you want to record the FM radio, press “Space-m (dots 1-3-4)” to call
menu, move to “Record (r)” and press “Enter”. Or just press “Enter-r
(dots 1-2-3-5)” without calling menu. Then the record dialog box will be
opened and the Braille Sense OnHand starts recording.
The record dialog box consists of as follows.
1. “Record status” status bar
2. “Pause/Continue” button
3. “Stop” button
4. “Cancel” button
You can move among these controls by pressing “tab (Space-4-5 or F3)”
or “shift-tab (Space-1-2 or Space-F3)”.
While recording the FM radio, if you press enter on “Pause” button or
press “a (dot 1)”, recording will pause, and the name of button is
changed to “Continue”. If you press “Continue” button or press “g (dots
1-2-4-5), recording will be continued. “Record status” will show the
frequency of the FM radio under recording. If you press “Enter” on “Stop”
button or press “s (dots 2-3-4)”, recording FM radio will stop.
Recorded files will be saved in the “flashdisk/media/FM radio” folder.
The file name will be “added channel label (frequency)-xx.mp3”. “xx” will
start from 01 and increased by one when recording the FM radio sound.
If unregistered channel is recorded, “FM radio” will be used as a file
name instead of “added channel label”. If you stop recording, the record
dialog box will be exited automatically. If you press “Enter” at “Cancel”
button or press “c (dots 1-4)”, the recorded file will not be saved and exit
the dialog box.
During recording, you cannot change the channel and frequency.