User's Manual

307
have to paste the file to the remote folder. It is done as soon as you
activate the “Send To” function. When you activate this function, the
file can only be sent to the root of the remote folder list. To activate the
“Send To” function, perform the following steps:
1. After the FTP service is connected, you can press “Space-m (dots 1-
3-4)” or “F2” while you are in the remote folder list to open the menu.
Then, press “Space-1” or “Space-4” to move to “Open Local Folder”,
and press “Enter”. You can also activate this function without calling
up the menu by pressing “Enter-o (dots 1-3-5)”.
2. After you have activated this function, you will see the disk list, just
like when you open the file manager. You will be taken to “flashdisk”
by default. However, if you have a SD memory card or USB
memory stick inserted, you can navigate to those disks by pressing
“Space-1” or “Space-4”. Please refer to chapter 4 in this manual
regarding navigation keys in the File manager.
3. Then, select a file by pressing “Space” on the file. You can only
select files and not folders.
4. After you have selected a file, press “Space-m (dots 1-3-4)”, and then
press “Space-1” or “Space-4” to move to “Send To”, and press “Enter”.
Or, you can press “Enter-s (dots 2-3-4)” to activate the “Send To”
function without having to call up the “menu”.
5. Just like copying and pasting, you will hear a sound that indicates that
the Braille Sense OnHand is working. If the file is larger than 300
KB, you will also hear the progress meter each time an additional
10% has been completed. If the file is less than 300 KB, then you
will only hear the sound, and not the progress meter. When the
transfer has completed, you will hear, “xxx file sent”, where xxx is the
name of the file. If the file does not transfer, you will hear, “xxx file
not sent”. Once all of the files have been transferred completely,
you will hear, “Successfully sent”, and you will be returned to the
remote folder list.