User's Manual

311
If you want to disconnect the service, you can press “Enter-d (dots 1-4-
5)” while in the Bluetooth Manager, and the Braille Sense OnHand will
say, “Disconnect from service”, and you will be returned to the Bluetooth
Service list. You will no longer see the word “Connected” after
ActiveSync in the Bluetooth Service List.
You cannot use ActiveSync via USB and Bluetooth at the same time. If
the remote Bluetooth device is connected via USB and using ActiveSync,
you must disconnect the remote Bluetooth device in order to use the
ActiveSync service via Bluetooth.
13.2.5 Serial Port
If you connect this service, you should not connect the other services.
The Serial Port service will allow you to use your Braille Sense OnHand
as a wireless Braille display via Bluetooth. In order to use the Braille
Sense OnHand as a wireless Bluetooth display, please reference the
following sections. Note that you must be using Window-Eyes in order
to use the Braille Sense OnHand as a wireless Braille display. Note
that following explanation is how to use the serial port when the Window-
Eyes is installed as a screen reader program in PC. If you are using
Supernova as a screen reader, please contact HIMS by e-mail. The e-
mail id of HIMS is [e-mail]
.
13.2.5.1 Setting up the Braille Sense OnHand to Work as a Bluetooth
Braille Display
The following steps will walk you through setting up the Braille Sense
OnHand to work as a Bluetooth Braille display. These instructions
assume that you already have Bluetooth installed on your computer.
The following instructions assume that you are running Window-Eyes
5.5, or greater, and at least Windows XP, Service Pack 2. Before
starting, make sure that your Braille Sense OnHand is turned on.
Although it may not be necessary, you should close all applications that
are running on the Braille Sense OnHand, and be in the Program menu
for best performance. If you have more than one Braille Sense