User's Manual

312
OnHand, make sure that only the Braille Sense OnHand that you want to
configure is turned on.
13.2.5.2 Setting up the Computer
1. Navigate to the Bluetooth icon in the System Tray. You may do this
in Windows XP by pressing “windows key-b”, and then use the Right
or Left Arrow Keys until you reach the Bluetooth icon. Then, press the
“context menu key”. Note that if you don’t have the Bluetooth icon in
the System Tray, you may have to change the settings for the
Bluetooth icon to appear. Go to the Windows Control Panel,
Bluetooth Devices, Options, and then check the check box that says
“Show the Bluetooth Icon in the Notification Area”.
2. Press the “up or down arrow” keys until you get to “Open Bluetooth
settings”.
3. Press “Enter”.
4. Select the Device tab control. You may need to press Ctrl-Tab in
order to select this tab control.
5. Tab to the Add button.
6. Press “Enter”.
7. Press “Space” to check the checkbox for “My device is setup and
ready to be found”.
8. Press enter”.
9. The XP machine will find the Braille Sense OnHand, and it will be
called “Windows CE”. Remember that the Braille Sense OnHand
must be turned on in order to be found as mentioned above. If you
forgot to turn the Braille Sense OnHand on, leave it turned on, exit the
Bluetooth settings, and start at step number 1 above.
10. Press the “down arrow” key to focus Windows CE.
11. Tab to the Next button.
12. Press “Enter”.
13. Press “down arrow” to focus the radio button, “Let me choose my own
passkey”. Focus will automatically be put in the edit box, and you
may hear a tool tip that says, “We recommend using a passkey that is
8 to 16 digits long”. You should type your passkey here. For
example, you might type, “1111”.