User's Manual

359
press “Enter” on “General Functions”. Or, you can press “g (dots 1-2-4-
5)” in the menu to access “General Functions”. After starting the
calculation, 0 will be displayed in Computer Braille. On the calculation
line, you can access the “General Functions” by pressing “Enter-g (dots
1-2-4-5)”. If the dialog box pops up first, you will be placed on the
general function list. Once in the list, you can select what you want,
and press “Enter” on it to run the operator since the default is set to the
“Confirm” button in the dialog. In the dialog box, you can cancel the
operator selection by pressing “Enter” on “Cancel”, “Space-z (dots 1-3-5-
6)”, or “Space-e (dots 1-5)”. You can use hot keys of the operators for
convenient access.
The hot keys of the operators are as follows:
Plus: dots 3-4-6
Minus: dots 3-6
Divided by: dots 3-4
Multiply by: dots 1-6
Percent: dots 1-4-6
Power: Backspace-4-5
Square Root: Enter-q (dots 1-2-3-4-5)
Decimal point: dots 4-6
Left parenthesis: dots 1-2-3-5-6
Right parenthesis: dots 2-3-4-5-6
PI: Enter-p (dots 1-2-3-4)
Exponential: Enter-e (dots 1-5)
If you want to enter in negative numbers, you should type in minus (dots
3-6) and the number together in parentheses. For example, you should
type in minus 2 in the following manner: (-2).
For the percent operation, you can get the result when you put in the
numbers first and the percent sign (%) just after typing in the numbers.
Immediately after you have typed in the percent sign (%), the number
that you have typed in will be converted into a percent value. For
example, 90 + 20% equals 90 + 18. You will see the number 18 on
pressing the % sign since 18 is 20% of 90. So, you get 108 for your
answer.