User's Manual

373
4-5”)” and “shift-tab (“Space-1-2”)”. If you want to check the wakeup
call settings, open this dialog box again. It will show you the current
wakeup call settings. When the alarm sounds, the Braille display on
the Braille Sense OnHand will also display the message “Wake up call.
Press Backspace-enter to stop the alarm”. If you want to stop the
alarm, press “Backspace-Enter”. After you press “Backspace-Enter”,
the Braille Sense OnHand will remain on, even though the power switch
is turned to “Off”. In order to turn the Braille Sense OnHand off, you
must turn the power switch to “On”, and then back to “Off” after you hit
“Backspace-Enter”. Then, the Braille Sense OnHand will be turned off,
and the alarm will not sound again until you set it again. If you do not
plan on being able to turn the unit off and on, you should turn on the
“Power saving mode” in the “Global options” (as explained in section
3.31) to avoid draining the battery.
17.5.1 Set Time
When you open the “Wake up alarm” dialog box, the Braille Sense
OnHand will display the “Set time” field. The value is set to the current
time or the time specified previously. Here you can directly type in the
time, or set the time using the shortcut keys, as explained in section 6.3.
After you set the time, you should press “tab (“Space-4-5”)” to move to
the next field. While you are anywhere in the Braille Sense OnHand,
you can check the time by pressing “Space-t (dots 2-3-4-5)” to check the
time.
17.5.2 Alarm Sound
You can select an alarm sound for the wake up alarm. If you press “tab
(“Space-4-5”)” on “Set time”, you will hear the alarm sound that is
currently set. Press “Space-1” or “Space-4” to change the alarm sound,
and you will hear the different alarm sounds. Select one of the three
alarm sounds that are available. If you have selected the sound that
you want, press “tab (“Space-4-5”)” to move to the next field.