User's Manual

380
http://www.gwmicro.com/Support/Knowledge_Base/?kbnumber=GWKB1
043
For more information on Bluetooth, refer to Section 13.
17.10 Setup Internet
The “Setup internet” function is used to set up your IP configuration. In
“Setup internet”, you will find “Bluetooth DUN” and “Wireless LAN”. You
can move between the four items by pressing “Space-4” or “Space-1”.
To connect to the Internet via a wireless network, use the “Wireless
LAN” function.
If you want to activate “Setup internet”, press “Enter” on “Setup internet”
in the “Utilities” menu, or press “i (dots 2-4)” in the “Utilities” menu. You
can move through the “Utilities” menu items with “Space-1” or “Space-4”.
If you want to access to Internet with the Braille Sense OnHand, you
must set the Internet settings at “Setup internet” that is one of the
submenus of “Utilities” menu.
Or, if the PC in which the Active Sync program is installed is connected
to Internet and the Braille Sense OnHand is connected to that PC, then
you can connect the Braille Sense OnHand to Internet.
The functions of this menu are explained in greater detail in the following
sections.
17.10.1 Bluetooth DUN setup
If you wish to connect to Mobile network using Bluetooth DUN, you can
move to “Setup internet” in the “Utilities” menu and select “Bluetooth
DUN” and enter on it.
The Bluetooth DUN setup contains the following: “Connect list”,
“Default”, “Add”, “Modify”, “Delete”, and “Close”. You can move
between these by pressing “tab (“Space-4-5”)” or “shift-tab (“Space-1-
2”)”. Within each item, you can move by pressing “Space-4” or “Space-
1”.