User's Manual

3.7 Message Display Time

You can select how long a Braille message will be displayed on the

Braille display. This feature is available when the voice is off. When in

“Stand by” and “Ignore” mode you can turn on the voice. The shortcut

key is “m (dots 1-3-4)”. You can select among “Stand by”, “Ignore”, and

1 to 10 seconds. The default is “3 seconds”. The value is increased

when you press the “Space” key and decreased when you press the

“Backspace” key To set “Stand by” mode, press the “Space” key until

you reach “Stand by”.. In this mode, the message will disappear when

you press any key. The higher value you select, the longer the

message remains. If you skip the message before the time you set, you

can clear the message by pressing any key. If you choose “Ignore”, then

messages won’t be shown on the display. If you have changed the

setting, press the “Enter” key to save the setting. You can also press

“tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” and press “Enter” on the

“Confirm” button”. If you do not want to save the setting, press “tab

(“Space-4-5”)” or “shift-tab (“Space-1-2”)”and “Enter” on the “Cancel”

button”. You can also cancel saving the setting by pressing “Space-z

(dots 1-3-5-6)” or “Space-e (dots 1-5)”.

3.8 Voice

This menu will allow you to turn the Braille Sense OnHand voice on or

off. The shortcut key is “v (dots 1-2-3-6)”. By default the voice is set to

on, so you will hear the Braille Sense OnHand speak. You can turn off

the voice with the ‘“Space”. You can toggle it on and off by pressing

“Backspace-F2” while you are using another program in the Braille

Sense OnHand without having to call up the “Global options”. If you

have changed the setting, press the “Enter” to save the setting. You can

also “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Confirm”

button, and press “Enter”. If you do not want to save the setting, “tab

(“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Cancel” button, and

then press “Enter”. You can also cancel saving the setting by pressing

“Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5)”.