User's Manual

with the “Space” and the “F1” key. If you are at level 12, and increase

the rate by one unit, you will go to level 1. Also, if you are at level 1, and

decrease the rate by one unit, you will go to level 12.

If you have changed the setting, press the “Enter” to save the setting.

You can also “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the

“Confirm” button, and press “Enter”. If you do not want to save the

setting, “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Cancel”

button, and then press “Enter”. You can also cancel saving the setting by

pressing “Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5)”.

3.15 Voice Pitch

You can control the voice pitch of the Braille Sense OnHand. The

shortcut key is “t (dots 1-2-3-4-5)”. The available options are 1 through

10 with the default set to 6. At level 10, the voice pitch will be the

highest; and, at level 1, the voice pitch will be the lowest. The “space”

key will increase the voice pitch and the “backspace” key will decrease

the voice pitch by one level. Just as with the voice volume and voice

speed, if you are at level 10, and you increase the voice pitch by one

level, you will go to level 1. And, if you are at level 1 and decrease the

voice pitch by one level, you will go to level 10. When you are not in the

“option”, menu, you can increase the pitch by pressing, “enter” and “F4”,

or you can decrease it by pressing “enter” and “F1”.

If you have changed the setting, press the “enter” key to save the setting.

You can also “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the

“confirm” button, and press “enter”. If you do not want to save the setting,

“tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the “cancel” button, and

then press “enter”. You can also cancel saving the setting by pressing

“space-z (dots 1-3-5-6)” or “space-e (dots 1-5)”.

3.16 Scroll Voice

You can decide if you want the Braille Sense OnHand to speak while

using the scroll buttons in the document. The shortcut key is “s (dots 2-

3-4)” with the default set to “Off”. The default setting (Off) does not allow