User's Manual

51
button, and then press “Enter”. You can also cancel saving the setting
by pressing “Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5)”.
For your reference, this option is set to “Off” even if you are set to “On”
when connected the Braille Sense OnHand to USB keyboard. And if you
remove the USB keyboard, this option will be returned to value that
before you connected to the USB keyboard.
3.34 Spell check Automatically
You can choose whether the Braille Sense OnHand will check spelling
or not. This option is available in “multi edit boxes” in programs such as
the schedule manager, address manager, e-mail messages, the word
processor, etc. The short cut key for this option is “c (dots1-4)”.
By default this setting is set to “No” which will not check your spelling.
If you want to check spelling, press “Space” to toggle the option to “Yes”
and press “Enter”. Or, press “tab (“Space-4-5”)” to move to the “Confirm”
button, and press “Enter”.
If you set the option to “Yes” and enter a misspelled word, you will hear
a beep sound. You will hear a beep sound, even though you shut “No”
the audio alert discussed in section “3.22”.
If you do not want to save the changed setting, press “tab (“Space-4-
5”)” to move to the “Cancel” button, and press “Enter”. You can also
cancel saving the setting by pressing “Space-z (dots 1-3-5-6)” or
“Space-e (dots 1-5)”.
3.35 Default Document
This function is used to set the default document type applied when you
create a new document using the word processor on the Braille Sense
OnHand. The shortcut key for this option is “q (dot 1-2-3-4-5)”. When
you create a new document in the “word processor”, “Braille document”