User's Manual

83
at the end of the document, it is better to select “backward” as the
direction used for searching.
4.3.2 Find Again
When you want to run the “find again” command; you can press
“space-m (dots 1-3-4)” or “F2.” Then move to “go to” by pressing
“space-4.” Then, press “enter” on “go to.” Move to “find again” by
pressing “space-4” to move to “find again” and press “enter,” or press
“h (dots 1-2-5)” in the “go to” menu. When you are editing a
document, you should press “enter-f (dots 1-2-4)” to activate this
command. When “find again” is executed, “find again” will look for
the text that was used in the previous “find.” “Find again” will search
in the same direction that was used with the last “find.” If you have
not yet used the “find” command in the current document, and you
execute “find again,” it will not work. “Find again” is used to find the
text that you have previously found in the current document.
4.3.3 Replace
To execute this command, press “space-m (dots 1-3-4)” or “F2,” and
move to “go to” by pressing “space-4.” Then, press “enter” on “go to.”
Move to “replace” by pressing “space-4” to move to “replace (r),” and
press “enter,” or press “r (dots 1-2-3-5)” in the “go to” menu (which is
the short cut). While editing a document, pressing “enter-r (dots 1-2-
3-5)” will activate this function.
“Replace” also has a dialog box that consists of the following fields:
“text to find,” “replace with,” “search direction,” “match case,”
“replace,” “confirm” and “cancel.” You can move between the fields
by pressing “tab (“space-4-5”)” or “shift-tab (“space-1-2”)”. The
following is a description of each function.
1) Text to find
You can type in the text that you want to be replaced in this field.
2) Replace with
You can type in new text that will replace the text that is found.
After you type in “text to find” and “replace with,” the Braille Sense
Plus B32 will find the text and replace it in the direction that you