User's Manual

4.3.7 Set Mark

The “set mark” command marks a position in the document that you

want to use later. To execute this command, press “space-m (dots 1-

3-4)” or “F2,” and move to “go to” by pressing “space-4.” Then, press

“enter” on “go to.” Move to “set mark” by pressing “space-4,” and

then press “enter,” or press “m (dots 1-3-4)” in the “go to” menu,

which is the short cut. While editing a document, press “enter-m

(dots 1-3-4)” to activate this command.

Move the cursor to the location that you want to mark, and press

“enter-m (dots 1-3-4”). Then, the Braille Sense Plus B32 will say

“mark name:.” To name the mark, use the letters a through z. For

example, if you put down the letter “a (dot 1),” the Braille Sense Plus

B32 will move you to that point in the document immediately. If you

are in the document, the Braille Sense Plus B32 will not show the

mark sign. If you selected “view format character” in “settings,” which

was explained in section 4.1.7, you will see the bookmark sign in the

document. You can go to marked text by using “space-3” or “space-

6,” and the bookmark sign will appear, which is “$pl (mark name).” If

you move the cursor to the mark location in a document, you can see

dots 7-8 all through the mark sign. This means that the Braille Sense

Plus B32 will deal with the marked text as a chunk, but not with every

character one by one.

4.3.8 Go to Mark

The “go to mark” command finds a mark that has already been

marked. When you want to execute this command, you can press

“space-m (dots 1-3-4),” or “F2,” and move to “go to” by pressing

“space-4.” Then, press “enter” on “go to.” Move to “go to mark” by

pressing “space-4,” and then press “enter,” or press “j (dots 2-4-5)” in

the “go to” menu, which is the short cut. You can jump to anywhere

in a document to marked text with by pressing “enter-j (dots 2-4-5).”

If you press “enter-j (dots 2-4-5),” the Braille Sense Plus B32 will say

“mark to move:.” If you type in the character of the mark name that

you want to locate, the Braille Sense Plus B32 will move the cursor to

the marked text with dots 7-8 embossed in the first cell.