User's Manual

7) Footer

This is used to edit the footer that will be embossed on the

bottom of every page. Move to “footer” and type in the text to

be embossed as the footer. After you set every field, move to

“confirm” or “cancel,” and press “tab (“space-4-5”).” If you want

to change a setting, or check your settings again, press “space-

1” to move to the previous fields.

8) Confirm / Cancel

In order to apply a setting, press “enter” when “confirm” is

displayed. If you do not want to change the setting, you will

need to press “enter” when “cancel” is displayed.

4.5.2 Print Document Layout

This option will allow you to set the layout of the document for printing

on an ink printer. Press “space-m (dots 1-3-4)” or “F2” to call up the

menu while you are editing a document, and select “layout” or press “l

(dots 1-2-3)” (which is the shortcut), and then select “print document

layout.” Or, press “backspace-t (dots 2-3-4-5),” which is the hot key

for “print document layout.” The settings in this menu are applied to

all the paragraphs in the selected document. You can navigate the

menu items with “space-1” or “space-4,” and you can move to

“confirm” or “cancel” by pressing “tab” (“space-4-5” or “F3”). You can

skip an item by pressing “space-4” if you do not want to change the

default setting.

The following is a detailed explanation of each setting:

1) Set top margin

This sets the top margin for ink printing. The top margin is the

distance from the top of the paper to the first line of the printed

paragraph. The default value is set to 20mm (about 0.78 inches).

If you are going to change the default setting, you can type in a

number, which will make the margin as big as you would like to

have it.

2) Set bottom margin

This sets the bottom margin for ink printing. The bottom margin is

the distance from the bottom of the paper to the last line of a

printed paragraph. The default value is set to 20mm (about 0.78

inches). If you are going to change the default setting, you can