User's Manual

9) Confirm / cancel

In order to apply a setting, press “enter” when “confirm” is

displayed. If you do not want to apply a setting, you will need to

press “enter” when “cancel” is displayed. If you press “enter” on

cancel, you will be taken out of the menu. You must press “tab

(“space-4-5”)” or “shift-tab (“space-1-2”)” to get to the confirm and

cancel buttons.

4.5.3 Braille Paragraph Layout

In order to call up the “Braille paragraph layout,” press “space-m (dots

1-3-4)” or “F2” while you are editing a document. Then, press “enter”

on “layout,” or press “l (dots 1-2-3)” while in the “layout” menu (which

is the short cut), and then select “Braille paragraph layout.” Or, you

can press “backspace-1-2-4-6.” The changed layout will be applied

only to the selected paragraph. These settings are not applied to

other paragraphs.

You can navigate between the menu items by pressing “space-1” or

“space-4.” Move to “confirm” or “cancel” by pressing “tab” (“space-4-

5” or “F3”). You can skip an item by pressing “space-4” if you do not

want to change the default setting.

In this setting, you can set the following items:

1) Indent first line

This indents the first line of the paragraph as designated by the

number of characters. The default value is set to 0. In order to

change this setting, type in the number of characters to be

indented on the “indent first line” setting item. Press the down

scroll key or “space-4” in order to move to the next setting item.

2) Indent all lines except the first line

This indents all the lines of the paragraph, except the first line of

the paragraph as designated by the number of columns. If you

want to indent all of the text, except for the first line, by typing in a

number. You can make the indent as big as you want it by

changing the number of columns, which will indent all lines,

except for the first line. Press “tab (“space-4-5”)” in order to

“confirm” and “cancel.” If you want to change the setting of a

previous item, move to it by pressing “space-1,” and change it.

The default is set to “0.)