User's Manual

3) Confirm / cancel

In order to apply changes, you need to press “enter” when

“confirm” is displayed. If you want to exit from a setting without

changing it, you should press “enter” when “cancel” is displayed.

You must press “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to

get to the confirm and cancel buttons.

4.5.4 Print Paragraph Layout

You can set the layout of the current paragraph for printing on an ink

printer. In order to set “print paragraph layout,” press “space-m (dots

1-3-4)” or “F2” while you are editing a document, and select “layout,”

or press “l (dots 1-2-3)” (which is the short cut), and select “print

paragraph layout.” Or, press “backspace-2-3-4-6,” which is the hot

key for “print paragraph layout.” This setting applies only to the

paragraph that you are on when the setting is changed. This setting

change does not apply to other paragraphs. You can navigate the

menu items by pressing “space-1” or “space-4,” and you can move to

“confirm” or “cancel” by pressing “tab (“space-4-5” or “F3”).” You can

skip an item by pressing “space-4” if you do not want to change the

default setting.

The following is a detailed explanation of the settings for “print

paragraph layout:”

1) Set left margin

This sets the left margin for ink printing. The default value is set

to 0mm. In order to change the setting, you will need to type in

the value. Move to the next setting by pressing the down scroll

button or press “space-4.”

2) Set right margin

This sets the right margin for ink printing. The default value is set

to 0mm. In order to change the setting, you will need to type in

the value. Move to the next setting by pressing the down scroll

button or press “space-4.”

3) Indent first line

This sets the indentation of the first line. The first line will be

indented by the value that you select, and the other lines will not

be indented. This setting is valid for the paragraphs that follow,

unless the setting is changed. The default value is set to 0. In

order to change the setting, you should type in the number of