User's Manual

104
If you want to put an extension number after any phone number,
enter the phone number as described above, and then type a comma
(,), followed by the extension number, as in “000-000-0000,100.” In
this case, you should press “dot 6” to enter the comma in computer
Braille or “dot 2” in grade 1 Braille.
When you enter a home page address or an e-mail address, you
should enter the information using computer Braille. For the @ (at
sign), you should press “space-u (dots 1-3-6)” and then “dot 4.” A
period or dot (.) in a home page address (or an e-mail address)
should be entered as “dots 4-6.” A colon (:) can be typed in using
“dots 1-5-6” and a slash (/) can be typed in using “dots 3-4.”
By pressing “tab (“space-4-5”),” you can get to the “memo” field. You
can type in multiple lines of text in the “memo” field. When you want
to start a new line of text, you should press “enter.”
When you are done entering information for a record, you can press
“tab (space-1-2)” until you reach the “confirm” button. Then, press
“enter” on “confirm.”
5.3.2 Setting Add Address Fields
“Set address fields” enables you to select one of the 22 fields to be
shown when you enter contact information. There are 22 fields in a
record, but you may not want to enter information in every one of the
22 fields. You can use “set address fields” to select only the fields
that you need.
To use this function, press “space-m (dots 1-3-4)” or “F2” to bring up
the menu, and then select “set address field,” or press “o (dots 1-3-5)”
(which is the short cut), and then press “enter.” Or, you can press
“enter-o (dots 1-3-5)” in the “add address” dialog box.
On the right side of each field name, “use” or “unused” is displayed.
The default value is set to “use.” In order to toggle the value, press
“space.”
After setting all the fields you want to change, move to the “confirm”
button or the “cancel” button by pressing “tab (“space-4-5”)” or “shift-