User's Manual

110
Before you use this command, please make sure that you are
connected to the internet.
5.6.3 Editing Addresses
In order to edit a field that is in a record, find the desired address by
using the “search address” function, and then move to the field you
want to change by using the “space-2” or the “space-5” repeatedly
until you arrive at the field that you want to change. Then, press
“space-m (dots 1-3-4)” to call up the “menu,” and select “modify
address.” Then, press “enter,” or you can press “enter-m (dots 1-3-
4),” which is the hot key. You can now enter new information for that
field. After you have finished entering the information, press “enter.”
The Braille Sense Plus B32 will save the changes that have been
made, and you will be returned to the first field of the record.
To save the changes that have been made, and exit from “edit
address” mode, move to “confirm” by pressing “tab (“space-4-5”)” or
“shift-tab (“space-1-2”)”, and then press “enter.” In order to exit from
edit mode without saving the changes that have been made, move to
“cancel” by pressing “tab (“space-4-5”)” or “shift-tab (“space-1-2”)”
and press “enter.” You can also exit from the “modify address” by
pressing “space-e (dots 1-5)” or “space-z (dots 1-3-5-6),” which are
the hot keys.
5.6.4 Deleting Addresses
To delete the record you are currently reading, call up the “menu” by
pressing “space-m (dots 1-3-4),” and select “delete address.” Then,
press “enter” or press “d (dots 1-4-5)” (which is the short cut) in the
“menu.” Or, you can press “space-d (dots 1-4-5)” (which is the hot
key) while the record is displayed. You can also delete more than
one record at a time as follows:
1) Select the records to be deleted and use the “delete” command.
To select the record that you want to delete, press “space” when
the record is displayed. Selected records can be deleted by
pressing the “delete” key (“enter-d (dots 1-4-5”). If you press
“space” again on a selected record before you delete it, the
selection will be canceled. The records you have selected will