User's Manual

130
access the “confirm” and “cancel” buttons by pressing “tab (“space-
dots 4-5”)” or “shift-tab (“space-dots 1-2”).”
6.11.1 Alarm Duration
With this option, you can change the duration of the alarm sound.
You can set this option to a value that is between 5 and 600 seconds.
The default value is set to 30 seconds. You should enter the number
in computer Braille or regular grade 1 Braille, without a number sign.
Press “enter” to save the changes, and exit from the dialog box. If
you want to set the “alarm repeat interval” in the next field, you should
press “space-4” to move to it.
6.11.2 Alarm Repeat Interval Time
When the alarm goes off, if you do not stop it by pressing
“backspace-enter,” the Braille Sense Plus B32 will keep giving you a
notice about the appointment after a specified time interval. The
“alarm repeat interval” option allows you to change this interval. You
can set the value anywhere from 1 to 60 minutes, and the default
value is set to 5 minutes. When you want to change the value, type
in a number between 1 and 60 in computer Braille, or regular grade 1
Braille. You can type these numbers without a number sign. After
entering the number, press “enter” to save the changes, and exit from
the dialog box. Or, if you press “tab (“space-4-5”)”, the Braille Sense
Plus B32 will move to the “repeat” edit box.
6.11.3 Repetition Times
The alarm will make a sound as the amount of time that you changed
the alarm duration and it then stops. After a specified time interval,
you will hear again the alarm sound.
“Repeat” is a field, which allows you to decide how many times the
alarm will sound. You can set the value from 1 time to 10 times, and
the default value is set to 3 times. To change the value, you type in a
number between 1 and 10. After entering the number, you press “tab
(space-4-5),” and press “enter” on the “confirm” button.