User's Manual

134
7. E-mail
The e-mail program is used to communicate with others using the
Internet. In order to use the e-mail program, you must have your own
e-mail account, which has been provided to you by your Internet
service provider.
The e-mail account that you have should support POP3 (Post Office
Protocol 3) and SMTP (Simple Mail Transfer Protocol). You should
check with your Internet service provider to make sure that your
provider supports POP3 and SMTP.
Before you use the e-mail program, you will need to setup the Braille
Sense Plus B32 to use the Internet, which is in the “utility” menu (see
chapter 15).
When checking the “inbox” in the email program, the menus are
different from the menus that are used when you are writing an email.
You should read this chapter carefully, before you use the e-mail
program on the Braille Sense Plus B32.
7.1 Executing E-mail and Service Registration
7.1.1 Launching the E-Mail Program
To launch the e-mail program on the Braille Sense Plus B32 press
“f1” to bring up the “program” menu of the Braille Sense Plus B32,
then press “space-4” repeatedly until “e-mail” is displayed, and then
press “enter.” Or, just press “e (dots 1-5)” on the “program” menu in
order to execute the e-mail program.
When you launch the e-mail program for the first time, the Braille
Sense Plus B32 will display “create service information at service
manager in tool menu.” Then, the “inbox” will be opened. The
“inbox” is the main window of the e-mail program. When you run the
e-mail program for the first time, this “inbox” is empty and the Braille
Sense Plus B32 displays “no list 0/0.”