User's Manual

136
12) Press “space-4” to move to “pop3 server:.” Type in the POP3
server address using computer Braille (Ex:
mail.braillesense.com). Check with your Internet service provider
or network administrator to find out what you should use as the
POP3 server name.
13) Press “space-4” to move to “smtp server:” and type in the SMTP
server address (Ex: smtp.braillesense.com). Check with your
Internet service provider or network administrator to find out what
you should use as the SMTP server name.
14) Press “tab (space-4-5)” to move to “confirm,” and then press
“enter” in order to save the changes. Or, just press “enter.”
15) Then, the Braille Sense Plus B32 will exit to “service name list”
and show the registered service name (Ex: service name: Braille
Sense Plus B32 1/1).
16) If you want to register another service, go to step 5 again, and
follow the steps explained above.
17) When you finish registering the services, press “space-z (dots 1-
3-5-6)” to exit to the “inbox.”
In order to move from a setting item (Ex: ID, password) to the
previous setting item, press “space-1.” And, in order to move to the
“confirm” button or the “cancel” button, press “tab (space-4-5)” or
“shift-tab (space-1-2).”
If you made a typo in an item such as service name, ID, or password,
you can correct the typo as follows;
1) In order to delete the letter where the cursor is located, press
“space-d (dots 1-4-5).”
2) In order to delete the letter in front of the cursor position, press
“backspace.”
3) In order to delete the current line, press “backspace-1-4.” Then,
the Braille Sense Plus B32 will ask “delete line: yes.” If you press
“enter,” the selected line will be deleted. If you do not want to
delete the current line, press “space” to change from “yes” to “no”
and press “enter.”
When you need to type using computer Braille to type in your ID,
password, and address, please use the following computer Braille:
1) Dot (.””): dots 4-6
2) At sign (“@”): Press “space-u” and release it, then press dot 4.