User's Manual

140
1) Press “enter-I (dots 2-4)” when “from: (sender’s e-mail address)
xx/yy” is displayed.
2) Then, the “add address” dialog box will be opened, and “name:
(sender’s user name or e-mail address)” will be displayed.
3) Type in the sender’s name with your Braille keyboard, or press
“tab (space-4-5)” to move to “confirm,” and press “enter.”
When you type in the name, you can type it in directly without
pressing the cursor key to designate the input position on the Braille
cell, if you want to retype the name. But, if you designate a specified
position by pressing a corresponding cursor key, you can modify the
displayed name.
If the address that was typed in is saved, and the dialog box is closed,
the Braille Sense Plus B32 will show you the “from” item again.
By saving the e-mail ID using the above method, the name and its e-
mail id will be saved in the Braille Sense Plus B32. The saved e-mail
ID can be used to send your message. This will be explained in
section 7.2.3.3.
If you want to cancel saving the e-mail ID, press “tab (space-4-5)” to
move to the “cancel” button, and press “enter,” or just press “space-e
(dots 1-5).”
7.2.2.4 Message Control
“Message” shows the message body of the selected e-mail. You can
move to a message by pressing “tab (space-4-5).” Or, you can read
a message by pressing “enter” when “subject,” “date,” or “from” is
displayed. In case of pressing “enter” on “subject,” “date,” “from”
controls, you will automatically hear the whole message body, if you
want to stop this reading at this time, just press “backspace-enter.”
When you read the message, all of the control keys are the same as
in the word processor.