User's Manual

141
7.2.2.5 Attachment Control
You can find and download the attached file at “Attach.” It will appear
only for the e-mail that has an attached file.
“Attach” is displayed in the form of “attach: (attached file name)
xx/yy.” The “yy” is the total number of the attached files to the e-mail
and “xx” is the “xxth” attached file.
The following is the procedure to download attachments;
1) Move to the desired file name in “attach” by pressing “space-4” or
“space-1.”
2) Press “space” on the file name that you want to download. Then
“*” will be displayed in front of the file name.
3) Press “enter” to download that file. Then “Current download path
is set to /flashdisk/download. Do you want to change it? No” will be
displayed. Press “enter” in here.
By doing so, the selected file will be saved in the “download” folder in
“flashdisk.”
If you have more than one attachment that you want to download,
you can press “enter-a (dot 1).” If you want to download only the
attached file that is displayed on the Braille display, just press “enter”
without pressing “space.”
If you want to change the download path, please refer to section
7.5.2.1 (Set Download Path).
7.2.3 Sending E-Mail Messages
In order to send an e-mail message, you should register your e-mail
address as explained in section 7.1.2 (Registering e-mail service).
Writing an e-mail message and sending procedure is as follows;
1) Call up the e-mail menu by pressing “space-m (dots 1-3-4)” or
“F2.” The “file” menu will be displayed.
2) Press “enter” on the “file” menu. Then “write new mail” will be
displayed.
3) Press “enter” on “write new mail.”