User's Manual

154
The e-mail saved in the “storage box” can be sent again using the
steps below:
1) Press “space-m (dots 1-3-4)” or “F2” in the “inbox” to call up the
“e-mail” menu.
2) Press “space-4” to move to the “message” menu.
3) Press “enter.” Then, “reply” will be displayed.
4) Press “space-4” to move to “send mail from storage box.”
5) Press “enter.” Then, the e-mail subjects will be displayed that are
saved in the “storage box.” You can jump to this stage by
pressing “enter-s (dots 2-3-4).”
6) Press “space-4” or “space-1” to move to the e-mail that you want
to send again. Then, you can send it with the same method as
explained in step 16 in section 7.2.3 (Sending E-mail Message).
The e-mail in the storage box consists of “subject,” “Account,” “To,”
“CC,” “BCC,” “subject,” “message,” and “attach” items. “Attach” will
be displayed if a file is attached to this e-mail. You can move from
one item to the next by pressing “tab (space-4-5)” and “shift-tab
(space-1-2).”
You can move from one e-mail to the next e-mail by pressing “space-
4” or “space-1.”
The e-mail message saved in the “storage box” can also be modified.
In step 5 above, press “tab (space-4-5)” when “subject” is displayed
to move to the desired item, such as “to” or “message,” etc. Then,
you can modify the email message, but the “subject” cannot be
modified.
In order to exit from “send mail in storage box,” press “space-e (dots
1-5)” or “space-z (dots 1-3-5-6).” Then, the Braille Sense Plus B32
will return to “inbox.”
7.3.6 Printing E-Mail Messages
You may want to print an email that you received in using either an
embosser or an ink printer.
In order to print to an ink printer, do the following: