User's Manual

155
1) Connect the Braille Sense Plus B32 to an ink printer with the
printer cable that was provided by the manufacturer of the printer.
The printing port must be the same port that was set in the “print
port” in the “option menu.”
2) Press “space-m (dots 1-3-4)” or “F2” to call up the menu. Then,
the “file” menu will be displayed.
3) Press “enter.”
4) Press “space-4” to move to “print e-mail.”
5) Press “enter.” Then, the dialog box will be opened, and “printer” is
displayed. If you press “space-p (dots 1-2-3-4)” you will be taken
directly to this stage.
6) Press “enter” on “printer.” Or, press “tab (space-4-5)” to move to
the “confirm” button, and then press “enter.” Then, the selected e-
mail will be printed through an ink printer.
If you want to print through a Braille printer (embosser), press “space”
at step 5 above to change “printer” to “embosser,” and then press
“enter.”
If you want to cancel printing, press “tab (space-4-5)” until the
“cancel” button is displayed, and then press “enter.” Or, you can
press “space-e (dots 1-5)” or “space-z (dots 1-3-5-6).”
7.4 Edit Menu
The “edit” menu contains the following items: “select all,” “start
selection,” “copy,” “paste,” “cut,” “delete,” “move to next unread
message,” “find,” “find again,” “copy to folder,” and “move to folder.”
To access the “edit” menu, press “space-m (dots 1-3-4)” or “F2.”
Then, use “space-4” to move to the “edit” menu, and press “enter” on
“edit.”
7.4.1 Select All
The “select all” function will allow you to create a selection that will
automatically select everything that can be selected where you are in
the email program. This function will allow you to select text, as well
as e-mail messages. To activate this function, press “space-m (dots
1-3-4)” or “F2.” Then, you can use “space-4” to go to the “edit” menu,